ASCO 8210G095LF-120/60 Lead-Free Brass Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 3/4" Orifice, 5 Cv Flow, 120V/60 Hz, 110V/50 Hz

ASCO’s lead-free brass solenoid valves meet the EPA’s Safe Drinking Water Act (section 1417) low lead requirements. These rugged industrial valves meet the same pressure and temperature ratings as a traditional brass valve but are suited for clean water applications. The Lead-Free Brass valves are drop in replacements to standard brass valves and the Lead-Free Brass valve is marked with a “LF” on the body and bonnet for quick field identification. ASCO's 2-Way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are Normally Closed (NC) and Normally Open (NO). Two types of constructions apply to 2-way solenoid valves, which are direct acting and internally piloted. With Direct acting constructions, the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open Valve. The valve will operate at pressures from 0 psi to its rated maximum. Internally piloted constructions use line pressure to assist operation. When the coil is de-energized (on a Normally Closed Valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve. The term “Lead-Free” for brass materials is defined by the SDWA 1417 as having a maximum weighted average lead content of 0. 25wt% on the wetted surface area.

• Valves comply with Safe Drinking Water Act (SDWA) Section 1417 Lead Free requirements
• Long service life and low internal leakage
• Normally Closed Operation
• 0 to 150 PSI Operating Pressure Differential (Water)